Joints made with Magna-Tac M24 have good peel, impact and shear strengths and retain a large percentage of their strength when stressed at elevated temperatures. Recommended for bonding metals, rigid plastics, ceramics, wood, and porous materials to themselves and to each other. Meets Bell Helicopter Specification 299-947-107 TYPE III, class 6.

Application Instructions:

• Surface Preparation: Degrease. Remove corrosion products and mold release, if any. Surfaces must be dry.  
• Mix adhesive: Stir each part well, separately. Then, accurately weigh out and mix together thoroughly 4 parts of part I and one part of Part II. The mixture has a working life of up to one month at room temperature.  
• Coating: Apply a light brush coat (2-4 dry mils or 6-15 wet mils) on each surface or apply by spray. To spray, thin MagnaTac M24 with methyl ethyl ketone to a viscosity of 26 seconds on a #4 Ford cup. Use a DeVilbiss P-MBC-510 gun, #36 air cap, FF fluid tip OR equivalent.. with 25 psi atomization pressure and 5 psi fluid pressure. Hold the gun approximately 8" from the work.  
• Drying: Dry for 1 hour at 150F.